Performance Bulletin


Engine: Yamaha F115XB
Boat: KenCraft® Challenger 190
Configuration: Single
Test Date: 11-Nov-2015
KenCraft® Challenger 190

Performance Bulletin


Engine: Yamaha F115XB
Boat: KenCraft® Challenger 190
Configuration: Single
Test Date: 11-Nov-2015
F115XB

Performance Data

RPM
MPH
GPH
MPG
1000 3.8 0.5 7.6
1500 4.9 0.8 6.13
2000 5.6 1.3 4.31
2500 6.3 2 3.15
3000 10.2 2.6 3.92
3500 18.6 3.1 6
4000 23.2 4.1 5.66
4500 27.3 4.9 5.57
5000 31.2 6.5 4.8
5500 35.1 8.7 4.04
6000 39.2 10.7 3.66

0-20 MPH: 4.36

Notice To Consumer The information and data contained in this Performance Bulletin is approximate and subject to many different factors and variables. It is provided as a guideline only and should not be relied upon as representative of actual performance. Your boat’s performance may be different than the information contained in this Performance Bulletin due to various factors, including your boat’s actual weight, wind and water conditions, temperature, humidity, elevation, bottom paint, boat options affecting wind/water drag and/or boat weight, and operator ability. Please confirm the specifications and performance data on your specific boat/engine combination with your dealer prior to purchase. Please also keep in mind that the data contained in this Performance Bulletin may or may not have been performed using Yamaha PowerMatched components. Yamaha reserves the right to change the specifications and performance data of this Performance Bulletin or engine without notice. This document contains many of Yamaha’s valuable trademarks. It may also contain trademarks belonging to other companies. Any references to other companies or their products are for identification purposes only, and are not intended to be an endorsement.

36 - KenCraft® Challenger 190

KenCraft® Challenger 190

Length 18' 8"
Beam 7' 10"
Dry Weight (Boat Mfr. Pub) 1,875 lbs
Maximum HP 150 hp
Fuel Capacity 50 gal
Weight as Tested 2,866 lbs

F115XB

Horsepower 115 hp
Induction EFI
Displacement 111.8 cu. in.
Weight (Estimated) 386 lbs
Gear Ratio 2.15

Engine Mounting Height

Mounting Hole Position #2

Propeller(s)

Series Aluminum
Diameter x Pitch 13 1/4 x 17
Yamaha Part # 6E5-45945-01-00
Propeller Material Aluminum

Test Conditions

Number of People 2
Air / Water Temperature (Fahrenheit) 61° F / 65° F
Elevation (in feet above sea level) 0'
Wind Velocity 0-5 MPH

Comments

Test weight includes 1/2 tank of fuel, 1 battery, safety and test gear.

YPB#: PB_KCB_Challenger190_F115XB_2015-11-11_OCC

Boat Manufactured By:
KenCraft
4155 Dixie Inn Road • Wilson, NC 27893
(252) 291-0271
www.kencraftboats.com