Performance Bulletin


Engine: Yamaha F200XCA / LF200XCA
Boat: Chris Craft® Calypso 26
Configuration: Twin
Test Date: 13-Jul-2015
Chris Craft® Calypso 26

Performance Bulletin


Engine: Yamaha F200XCA / LF200XCA
Boat: Chris Craft® Calypso 26
Configuration: Twin
Test Date: 13-Jul-2015
F200XCA / LF200XCA

Performance Data

RPM
MPH
GPH
MPG
1000 5.5 1.5 3.67
1500 7.4 2.6 2.85
2000 8.4 4.4 1.91
2500 11 6.7 1.64
3000 18.9 8.9 2.12
3500 27.6 11 2.51
4000 33.1 14.9 2.22
4500 38.8 17.9 2.17
5000 43.5 26.5 1.64
5500 48.4 34.1 1.42
5950 52.2 39.2 1.33

Time to Plane : 4.96
0-30 MPH: 6.8

Notice To Consumer The information and data contained in this Performance Bulletin is approximate and subject to many different factors and variables. It is provided as a guideline only and should not be relied upon as representative of actual performance. Your boat’s performance may be different than the information contained in this Performance Bulletin due to various factors, including your boat’s actual weight, wind and water conditions, temperature, humidity, elevation, bottom paint, boat options affecting wind/water drag and/or boat weight, and operator ability. Please confirm the specifications and performance data on your specific boat/engine combination with your dealer prior to purchase. Please also keep in mind that the data contained in this Performance Bulletin may or may not have been performed using Yamaha PowerMatched components. Yamaha reserves the right to change the specifications and performance data of this Performance Bulletin or engine without notice. This document contains many of Yamaha’s valuable trademarks. It may also contain trademarks belonging to other companies. Any references to other companies or their products are for identification purposes only, and are not intended to be an endorsement.

66 - Chris Craft® Calypso 26

Chris Craft® Calypso 26

Length 26' 6"
Beam 8' 6"
Dry Weight (Boat Mfr. Pub) 5,500 lbs
Maximum HP 400 hp
Fuel Capacity 154 gal
Weight as Tested 7,693 lbs

F200XCA / LF200XCA

Horsepower 200 hp
Induction EFI
Displacement 2.8 L
Weight (Estimated) 489 lbs
Gear Ratio 1.86

Engine Mounting Height

Mounting Hole Position #3
Ventilation Plate Height 1" Above Boat Bottom

Propeller(s)

Series Reliance® Series
Diameter x Pitch 14 1/4 x 18
Yamaha Part # 68F-45978-10-00
Propeller Material Polished Stainless Steel

Test Conditions

Number of People 2
Air / Water Temperature (Fahrenheit) 90° F / 85° F
Elevation (in feet above sea level) 0'
Wind Velocity 0-5 MPH

Comments

Test weight includes 3/4 tank of fuel, 3 batteries, factory hardtop, safety and test gear.

YPB#: PB_CHR_Calypso26_t_F200XCA_2015-07-13_ODC

Boat Manufactured By:
Chris Craft
8161 15th Street East • Sarasota, FL 34243
(843) 376-2628
www.chriscraftboats.com